Garador DC/CM Garage Door Spring

Garador garage door springs to suit DC or CM (double canopy) doors. These are double-width canopy doors which have short, horizontal tracks only supported by the frame. A canopy door will stick out by around a third of its height when fully opened.

The springs are located at either side of the door with two springs on either side of the door, except for some smaller double-width doors (9’ wide) which may just have one. The springs may be encased inside white, plastic dust covers.

The link arm on Garador canopy doors is straight. This shouldn’t be confused with Garador’s double retractable doors which have a kinked arm.

It is always recommended to replace springs in pairs so that the door remains balanced.
Please note: If replacing only one spring, our standard product warranty does not apply. Please see the terms and conditions for more information.

How can I identify if this is the spring I need?

First, you can usually look at the back of the door which will have the model of the Garador garage door. This will then inform you whether these springs are correct for your door. The springs should measure 685mm in length and 28mm in diameter.

To determine the correct strength of spring you should find a three-digit identification number engraved in the end eyelet of the spring (7xx). Alternatively, please measure the width and height of your garage door and consult the spring table further down the page.

I have identified the spring model, what now?

Below you can find a table which has all the different Garador part numbers with corresponding numbers for each spring. The spring strength starts with 7, with this, you can look and see which spring to order. 

I am ready to install this Garador DC/CM garage door spring, how do I do it?

We have fitting instructions available which you can click on the ‘Fitting Instructions’ tab above, or you can find the PDF version by clicking here. We recommend using protective equipment, such as gloves and protective eyewear when removing and replacing your garage door springs.

It is always recommended to install the springs in pairs so that the door remains balanced. Please note that if you are replacing only one spring our standard product warranty will not apply. Please check our terms and conditions by clicking here if you would like more information.

I’m still unsure about a few things, how can I get in touch?

There are a couple of ways that most of our clients get in touch. The primary way is to simply call up at 01704 331 705 which will let you speak to our customer service team. 

Alternatively, you can send us a message either via email at sales@wsgaragedoorspares.com or via WhatsApp at 07481342447. If you include an image, all the better as that will make the identification process much simpler. We aim to respond to all communication within 24 hours, but the process can be expediated if you contact us during working hours.