Henderson Premier Cables

Click the PDF icon to open the printable fitting instructions for Henderson Premier Cables. 

SAFETY NOTES:
The spring is under tension. Please follow instructions carefully to avoid injury.

Wear protective gloves and eye protection. Two persons may be required for this operation.

Important:
BOTH cables must be replaced as the spare cables may be a different length to the originals. If only the broken cable is replaced the door may not operate correctly.

 
STEP 1
Using toggle bar or screwdriver in plug A, rotate shaft to ease spring pressure.

STEP 2
Insert crook pin into right hand head bracket (1) and secure door within openings.

STEP 3
Remove side jamb channels (2) and head bracket bolts (3).

STEP 4
Remove door arms (4) from head bracket and door by withdrawing split pins (5).

STEP 5
Detach free crimped end of cable (6.) from roller spindle clip (8).

STEP 6
Remove and discard cables and cones by driving hollow pin (7) from cone and shaft, using a hammer.

STEP 7
Replace cones ensuring that white cone is on the left hand side and black cone on the right hand side.

STEP 8
Ensure that cones are correctly fitted by checking that cable fixing points on cones are aligned with each other.

STEP 9
Fix cones using new hollow pins and hammer.

STEP 10
Refit the spring assembly and head brackets then replace door arm jamb channels by reassembling in reverse order.

STEP 11
Refit new cable by clipping into cone and roller spindle clips (8).

STEP 12
Ease spring pressure using toggle bar and remove crook pin.

STEP 13
Allow spring to take up slack, ensuring that cables are in the outer groove, run down behind the cone and that roller spindle clips (8) are in position, as shown.

Delivery Costs

Returns Policy

To return an unwanted order, please contact us within 14 days of receipt of delivery. Full returns information can be found here.